DuPont Industrial Corlar 2.1 ST (Gallon - Black)

Corlar® 2.1-ST™ is a satin gloss, high build epoxy mastic, two-package, VOC conforming product (2.1 lbs/gal)* based on DuPont amido amine modified polyamide epoxy technology.

The resulting highly durable coating delivers outstanding corrosion and chemical resistance. As a high performance direct-to-metal (DTM) coating or topcoat on carbon steel, galvanized steel, stainless steel, aluminum, concrete, concrete block and wood where:

-Rusted, hand or power-tool cleaned surfaces must be protected.

-Single coat applications up to 10 mils dry film thickness are required.

- Application will be made over damp surfaces and/or under conditions of high relative humidity.

-Excellent resistance to chemical and/or marine environments is required.

-Outstanding abrasion resistance and edge protection are required.

-Application by brush and roller, in addition to spraying, may be necessary.

-Application must be made at temperatures as low as 35°F.

- No induction time and long pot life will improve productivity.

Corlar® 2.1-ST™ may also be used as a high performance tank lining on carbon steel or concrete for immersion service in near neutral pH water, fresh water, or saltwater. Corlar® 2.1-ST™ is not recommended for use with potable water. Contact your DuPont Performance Coatings Representative for specific immersion service recommendations and procedures.